[May 17, 2023] Pass CCA-N 1Y0-231 Exam With 72 Questions
Ultimate Guide to Prepare Free Citrix 1Y0-231 Exam Questions and Answer
The Citrix 1Y0-231 exam is a valuable certification exam for IT professionals who want to enhance their skills and knowledge in the field of application delivery and security. The exam covers a wide range of topics that are relevant to the current IT industry and is highly valued by employers around the world. Passing the Citrix 1Y0-231 exam demonstrates the candidate's expertise in Citrix ADC 13 with Citrix Gateway and can lead to career advancement and better job opportunities.
Citrix CCA-AppDS Exam Syllabus Topics:
| Section | Objectives | Weight |
|---|---|---|
| Authentication and Authorization | - Determine the steps in Authentication process to establish identity. - Determine the steps in Authorization process to provide access to resources. - Determine how to customize multi-factor authentication. - Determine how to deploy Authentication and Authorization policies. - Determine how to configure nFactor in a given environment. - Determine how to configure SAML authentication based on a set of requirements. | 14% |
| Troubleshooting | - Determine how to resolve Citrix ADC log issues. - Determine how to monitor the Citrix ADC environment with Simple Network Management Protocol data. - Determine how to use AppFlow and Citrix Application Delivery Management features to troubleshoot an issue within Citrix ADC. - Determine how to use the Citrix Application Delivery Management to troubleshoot a given issue. - Determine which Citrix ADC troubleshooting tool to use to identify a given issue in an environment. | 8% |
| AppExpert | - Determine the appropriate policy expression structure of AppExpert to be used for a given environment. - Determine how to configure pattern sets and data sets for a given environment. - Determine how to utilize policy bind points for a given environment. - Determine how to use AppExpert with Citrix Gateway. | 6% |
| Basic Networking | - Determine which networking topology to use with Citrix ADC based on given requirements. - Determine which interfaces IP address types and VLANS to use during configuration of a given environment. - Identify which Citrix ADC routing and traffic-handling mode should be used for a given environment. - Determine how to configure Access Control Lists based on given requirements. | 8% |
| Integration for Citrix Virtual Apps and Desktops Solutions | - Determine how to integrate Citrix Gateway with Citrix Virtual Apps and Desktops. - Determine how to integrate with StoreFront. - Determine how to configure SmartControl for a given scenario. - Determine how to configure SmartAccess for a given scenario. | 8% |
| Securing the Citrix ADC | - Determine how to utilize authentication, authorization, and auditing. - Determine how to configure authentication and authorization on Citrix ADC. - Determine the components and steps required to secure a Citrix ADC configuration. - Determine how to utilize admin partitions in a given scenario. | 6% |
| Citrix ADC Platforms | - Determine which hardware to use (Citrix ADC MPX, VPX, CPX, BLX or SDX) when given a use case. - Identify the pieces of the multi-tenant structure for Citrix ADC SDX. - Determine the specific function of the SDX when given various SDX interface allocation scenarios | 5% |
| Customizing Citrix Gateway | - Determine how to configure Citrix Gateway applications based on given requirements. - Determine how to configure RDP Proxy for a given environment. - Determine how to configure portal themes for a given environment. | 5% |
Citrix 1Y0-231 is a certification exam that validates the knowledge and skills of professionals in deploying and managing Citrix ADC 13 with Citrix Gateway. The certification exam is designed for IT professionals who work with Citrix ADC 13 and Citrix Gateway and want to demonstrate their competence in managing these technologies. The exam covers various topics that include, but are not limited to, deploying Citrix ADC, configuring Citrix Gateway, managing user sessions, and troubleshooting.
NEW QUESTION # 16
A Citrix Administrator needs to block all local printer access from users in the Marketing department who are connecting remotely, but who should still have access when connecting inside the corporate network using the same Citrix Gateway.
What can the administrator configure to accomplish this?
- A. AppFlow
- B. SmartControl
- C. Simple access control list (ACL)
- D. Extended access control list (ACL)
Answer: B
NEW QUESTION # 17
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least connection
- B. Least response time
- C. Least bandwidth
- D. Least packets
Answer: C
NEW QUESTION # 18
A Citrix Administrator wants to customize the look of the landing page presented to users during the authentication process on Citrix ADC.
Which nFactor component should the administrator modify in this scenario?
- A. Next factor
- B. Logon Schema
- C. Pass-through factor
- D. NoAuth Policy
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/aaa-tm/authentication-methods/multi-factor- nfactor-authentication/nfactor-authentication-configuring.html
NEW QUESTION # 19
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server (IP address
192.168.100.25). The administrator needs to restrict access to this virtual server for 10 minutes.
Which access control list (ACL) will accomplish this?
- A. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600
- B. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000
- C. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600
- D. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000
Answer: C
NEW QUESTION # 20
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least connection
- B. Least response time
- C. Least bandwidth
- D. Least packets
Answer: C
Explanation:
Explanation/Reference: https://kb.wisc.edu/ns/page.php?id=13201#Least%20Bandwidth%20Method
NEW QUESTION # 21
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Run saved versus running configuration.
- B. Restart the Citrix ADC.
- C. Run high availability (HA) file synchronization.
- D. Restore from the revision history.
Answer: D
NEW QUESTION # 22
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except:
Shell
User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?
- A. Operator
- B. Superuser
- C. Network
- D. Sysadmin
Answer: D
NEW QUESTION # 23
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure LACP on the SDX for management interface.
- B. Configure LACP on the SDX for the data interface.
- C. Configure a failover interface set on each Citrix ADC VPX instance.
- D. Add a second interface to each Citrix ADC VPX instance.
Answer: B
Explanation:
Reference:
241_Exam_Preparation_Guide_v01.pdf (22)
NEW QUESTION # 24
Which three pieces of information are required for a Citrix Unified Gateway deployment? (Choose three.)
- A. Secondary authentication for the Citrix Gateway
- B. Valid SSL certificate
- C. Advanced license or higher
- D. Multiple IP addresses for user access
- E. Content Switching virtual server
Answer: B,C,E
NEW QUESTION # 25
Scenario:A Citrix Administrator configures an access control list (ACL) to block traffic from the IP address
10.102.29.5:
add simpleacl rule1 DENY -srcIP 10.102.29.5
A week later, the administrator discovers that the ACL is no longer present on the Citrix ADC.
What could be the reason for this?
- A. The administrator did NOT run the apply ACL command.
- B. The Citrix ADC has been restarted without saving the configurations.
- C. The simple ACLs remain active for only 600 seconds.
- D. The simple ACLs remain active for only 60 seconds.
Answer: A
NEW QUESTION # 26
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A command policy to the group
- C. A nested group to the new group
- D. Users to the group on the Citrix ADC
Answer: B
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX123782
NEW QUESTION # 27
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL virtual servers?
- A. SSL multiplexing
- B. SSL profile
- C. SSL policy
- D. SSL bridge
Answer: B
NEW QUESTION # 28
While applying a new Citrix ADC device, a Citrix Administrator notices an issue with the time on the appliance.
Which two steps can the administrator perform to automatically adjust the time? (Choose two.)
- A. Add an SNMP manager.
- B. Enable NTP synchronization.
- C. Configure an NTP monitor.
- D. Add an SNMP trap.
- E. Add an NTP server.
Answer: B,E
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/system/basic-operations.html#how-to-synchronize-system-clock-with-servers-on-the-network
NEW QUESTION # 29
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?
- A. Dedicated routes in the admin partitions for each department
- B. Admin partitions that use dedicated VLANs
- C. Policy-based routes for each department in the nsroot partition
- D. A VIP in each partition, and bind a VLAN for the department
Answer: B
NEW QUESTION # 30
A Citrix Administrator receives user complaints about latency while accessing a published application that is load-balanced on the Citrix ADC.
Which Citrix Application Delivery Management (ADM) feature can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. Gateway Insight
- B. WAN Insight
- C. Security Insight
- D. Web Insight
Answer: D
Explanation:
Explanation/Reference: https://www.citrix.com/content/dam/citrix/en_us/documents/data-sheet/citrix-application-delivery- management-data-sheet.pdf (5)
NEW QUESTION # 31
If a user device does NOT comply with a company's security requirements, which type of policy can a Citrix Administrator apply to a Citrix Gateway virtual server to limit access to Citrix Virtual Apps and Desktops resources?
- A. Session
- B. Traffic
- C. Responder
- D. Authorization
Answer: A
Explanation:
Explanation/Reference: https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/creating-and- enforcing-advanced-access-policies-with-xenapp.pdf
NEW QUESTION # 32
While applying a new Citrix ADC device, a Citrix Administrator notices an issue with the time on the appliance.
Which two steps can the administrator perform to automatically adjust the time? (Choose two.)
- A. Configure an NTP monitor.
- B. Add an NTP server.
- C. Add an SNMP manager.
- D. Enable NTP synchronization.
- E. Add an SNMP trap.
Answer: A,D
NEW QUESTION # 33
After being audited, a Citrix Administrator learns that additional security enhancements should be made to one of the virtual servers.
Which two actions can the administrator perform to accomplish this? (Choose two.)
- A. Enable the TLSv1.2.
- B. Disable the SSLv3.
- C. Enable the RC4 cipher suite.
- D. Create a SHA1 key.
Answer: A,D
Explanation:
Explanation/Reference:
NEW QUESTION # 34
Which Citrix Gateway feature should a Citrix Administrator configure to allow traffic for specific iOS applications only?
- A. Full SSL VPN tunnel for iOS
- B. Per app VPN tunnel
- C. Split DNS
- D. SmartControl for iOS
Answer: B
NEW QUESTION # 35
The Citrix ADC SDX architecture allows instances to share _____________ and _____________. (Choose the two correct options to complete the sentence.)
- A. the kernel
- B. CPU
- C. physical interfaces
- D. memory
Answer: B,C
NEW QUESTION # 36
Which type of policy would a Citrix Administrator use to disable USB redirection?
- A. SmartControl
- B. Auditing
- C. Session
- D. Authorization
Answer: C
NEW QUESTION # 37
Scenario: While attempting to access a web server that is load-balanced by a Citrix ADC using HTTPS, a user receives the message below:
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from getting this message?
- A. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- B. Ensure that users have the certificate's private key.
- C. Ensure that users have the server certificate installed.
- D. Ensure that users have the certificate's public key.
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-gateway/12-1/citrix-gateway-12.1.pdf
NEW QUESTION # 38
Which authentication type can a Citrix Administrator use to enable Citrix ADC authentication, authorization, and auditing (AAA) dual-factor authentication from a user's mobile device app?
- A. SAML
- B. RADIUS
- C. LDAP
- D. LOCAL
Answer: C
NEW QUESTION # 39
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)
- A. Change the client certificate to mandatory on the SSL parameters of the virtual server.
- B. Enable client authentication on the SSL parameters of the virtual server.
- C. Enable the two-factor option on the existing CERT authentication profile.
- D. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.
- E. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
Answer: A,B,D
NEW QUESTION # 40
......
Deploy and Manage Citrix ADC 13 with Citrix Gateway Practice Tests 2023 | Pass 1Y0-231 with confidence!: https://drive.google.com/open?id=1hyjML-0ac4WJA8ySWmg4gZr7IjoX9r-l
Pass 1Y0-231 Tests Engine pdf - All Free Dumps: https://www.pdfdumps.com/1Y0-231-valid-exam.html